How to keep power fittings?

　　1. It should be stored in a dry and ventilated place.

　　2. The insulating rod should be hung on the support and should not be in contact with the ground.

　　3. Insulated gloves should be stored in a closed kitchen and stored separately from other electrical fittings and meters.

　　4. Insulated boots should be stored in the kitchen and not allowed to replace rain boots.

　　5. The electroscope should be stored in a moisture-proof gate and placed in a dry place.

　　6. All power fittings are not allowed to replace other tools.

　　According to relevant statistics, there were more than one hundred unqualified brands in the entire flooring industry last year, and even industry representatives such as Dekor and Golden Eagle Egger also frequently appeared on the exposure stage, deeply trapped in the "quality door."

　　is also on the "blacklist", and this also reflects the long-standing stubborn illness of the Chinese flooring industry in product quality monitoring, and a quality revolution concerning the survival of the industry is imminent.

　　The industry's big names are stuck in the quality door, and the flooring industry urgently needs a quality revolution

　　How to use the insulating rod for power fittings:

　　①The use of insulating rods must be within the validity period.

　　②Insulation rods can be used for electrical testing when there is no corresponding level of electroscope, and insulated gloves and insulated shoes must be worn.

　　③The method of electrical test using an insulated pull rod: stand in a good position, stand firm, and raise the metal head of the insulated pull rod close to the equipment under test. When it is close to the virtual connection, watch the spark and listen to the discharge sound. There are sparks and clear discharge sound. If you are not sure about charging, you can connect the metal head of the insulating rod to the charged body, and gently slide it along the surface of the charged body to observe whether there is a small spark or discharge sound. If there is, it is charged, otherwise it is not charged.

　　④The method of hanging the ground wire with an insulating rod: first connect the grounding end of the ground wire, and use the metal T-shaped end of the insulating rod to cover the ground wire end in the metal ring of the ground wire terminal, and then pull the ground wire tightly along the insulating rod. , Raise the ground wire close to the equipment with no electricity experience, touch the three phases separately, after fully discharge, quickly and accurately hang on one phase, use the insulating rod to pull the ground wire end to the grounded wire, jam, and exit the insulating rod metal T-shaped end. Then, continue to hang the next phase ground wire.

According to relevant statistics, there were more than one hundred unqualified brands in the entire flooring industry last year, and even industry representatives such as Dekor and Golden Eagle Egger also frequently appeared on the exposure stage, deeply trapped in the "quality door."
　　
　　 is also on the "blacklist", and this also reflects the long-standing stubborn illness of the Chinese flooring industry in product quality monitoring, and a quality revolution concerning the survival of the industry is imminent.
　　
　　The industry's big names are stuck in the quality door, and the flooring industry urgently needs a quality revolution

　　How to keep power fittings?

　　1. It should be stored in a dry and ventilated place.

　　2. The insulating rod should be hung on the support and should not be in contact with the ground.

　　3. Insulated gloves should be stored in a closed kitchen and stored separately from other electrical fittings and meters.

　　4. Insulated boots should be stored in the kitchen and not allowed to replace rain boots.

　　5. The electroscope should be stored in a moisture-proof gate and placed in a dry place.

　　6. All power fittings are not allowed to replace other tools.