• 分类： News
• 作者：
• 来源：
• 发布时间：2021-03-02 11:44
• 浏览量：

(概要描述) 　　How to use the insulating rod for power fittings: 　　①The use of insulating rods must be within the validity period. 　　②Insulation rods can be used for electrical testing when there is no corresponding level of electroscope, and insulated gloves and insulated shoes must be worn. 　　③The method of electrical test using an insulated pull rod: stand in a good position, stand firm, and raise the metal head of the insulated pull rod close to the equipment under test. When it is close to the virtual connection, watch the spark and listen to the discharge sound. There are sparks and clear discharge sound. If you are not sure about charging, you can connect the metal head of the insulating rod to the charged body, and gently slide it along the surface of the charged body to observe whether there is a small spark or discharge sound. If there is, it is charged, otherwise it is not charged. 　　④The method of hanging the ground wire with an insulating rod: first connect the grounding end of the ground wire, and use the metal T-shaped end of the insulating rod to cover the ground wire end in the metal ring of the ground wire terminal, and then pull the ground wire tightly along the insulating rod. , Raise the ground wire close to the equipment with no electricity experience, touch the three phases separately, after fully discharge, quickly and accurately hang on one phase, use the insulating rod to pull the ground wire end to the grounded wire, jam, and exit the insulating rod metal T-shaped end. Then, continue to hang the next phase ground wire.